One Way Vision Printing

Got large windows with lots of passing by traffic? Then vinyl stickers is the perfect product for you to maximise your advertising coverage with great graphics using these Vinyl Stickers. Great for retail window stickers, office windows, or even car windows.

How to Install Apply One Way Vision Sticker Instructions

The Vinyl Stickers are very easy to install, there are lots of online resources available on youtube for you to watch to be 100% certain.

What you will need:

1. Wiper
2. Washing Liquid (Washing liquid water mix)
3. Stanley Knife
4. Ruler

Step 1

Firstly make sure the surface on which you are going to stick the stickers on to is clean, and has no dust particles. Any dust particles will result in small bumps on the sticker finish, so please ensure the surface is spotless.

Step 2

Then spray the glass with the washing liquid, you can be generous with the spray, make sure you have water on all parts of the glass on which you want to paste the sticker.

Step 3

Peel the back of the sticker and spray the washing liquid on the reverse non-printed side of the sticker. Again be generous and make sure you have water on all parts of the reverse side of the sticker. Dont worry, this will not damage or effect the printed sticker.

A good way would be to peel gradually and spray as you go along together with step 4.

Step 4

Apply the sticker to the surface, you should be able to maneuver the sticker due to the washing liquid, and adjust exactly where you want to place the sticker. Gradually work your way down and apply the sticker to the window.

Step 5

Using the wiper, working from left to right or top top bottom, squeeze the washing liquid out from between the sticker and the window. Dont worry about getting water on the sticker, as it will not effect the print as it is water proof. Make sure to remove any bubbles that may appear using the wiper.

And thats it! Leave for 24hrs, any remaining water will dry and the sticker will stick firmly to the glass.

Step 6

Finally once the sticker is firmly stuck to the glass, using the blade or Stanley knife and the ruler, cut around the edges to give it a perfect fit finish.

The results are pretty amazing, and a great advertising opportunity for attracting passing traffic.
 

If you have any questions, feel free to discuss with an online chat support agents, or feel free to give us a call.

Note: The stickers are applied to the outside of the glass.

Product Information

Our Shop Windows Stickers, aka shop window graphics are printed on Gloss material of 180GSM weight. Each roll is 1050mm wide and upto 20 meters in length. So if you have a graphic which is wider than 1050mm we will slice your shop window graphic and print so that when the panels are joined together, you will get a complete large window graphic.

Drying time for stickers is a minimum of 24hrs, due to the stickers being glossy, it can take upto 24 hrs for the ink to be touch dry before we dispatch. Orders places for next day delivery will not be dispatched on the same day, however, if its urgent, we can sometimes speed up the dry time, however, the company will not be liable if the stickers stick together during transit. It is always best to order large shop window graphic a few days in advance.